BR 23s - pneumatic - ANSI
Pneumatic control valve
VALVE STYLE
Segmented ball valve
USAGE
- Low-pressure service
- On/off service
- Hygienic service
VERSION
ANSI
MEDIUM TEMPERATURE
-200
to 450 °C /
-328
to
842 °F
SUPPLY
Pneumatic
VALVE SIZE
NPS 4
to
NPS 12
PRESSURE RATING
Class 150
LINING
without
Special features
- Consisting of double-eccentric segmented ball valve for slurry feed and discharge as well as actuator
- DIN ISO 5211 interface as standard
- TA Luft
- Straight-through flow path
- Shaft sealed by PTFE V-ring packing loaded by disk springs
- Suitable for viscous and solids-containing media
- Minimized dead spaces
- Leakage requirements according to DIN EN 12266, API 598 or ANSI FCI 70-2-2006
Accessories
- Lever
- Locking facility
- Air filters
Options
- Stem extension
- Cleaning connections and cleaning nozzle system
- Shaft sealed by double packing with test connection
- GMP versions
- Version complying with FDA regulations
The valve BR 23s - pneumatic - ANSI can be combinated with the following actuations:
Special features:
- Rotary diaphragm actuator
- Max. opening angle 90 ±3°
- Signal pressures from 2.5 to 6.0 bar
- Temperatures from –35 to +90 °C
- Torques from 15 to 5619 Nm
- Powerful thrust at high stroking speed and minimum friction by using low-wear rolling diaphragms
- Backlash- and maintenance-free bearings
- Direction of action (fail-open/fail-close) depending on the attachment to the rotary actuator
- Travel stops externally adjustable to limit the opening angle
- Excellent control properties thanks to large travel
- Interfaces according to DIN EN ISO 5211 and VDI/VDE 3845
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 5 to 11674 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Power transmission without clearance thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 5 to 11674 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Backlash-free force transmission thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Information
Certificates
Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.
Pin items on your list and contact us if you have any product-related questions.
Back to product selector